210m3/hr
HCM 150 Window/Wall Exhaust Fan
Original price was: $365.00.$315.00Current price is: $315.00.
The HCM Exhaust fan is suitable for all types of small or confined areas. It is mainly used for window installations, however can be used on thin walls. Please Note – If you require this HCM Exhaust fan for wall installation for a wall thicker than 25mm you will need to purchase a set of wall rods and a wall tube.
- Low Profile Design
- Rated “Continuous Run”
- 220-240V, single-phase, 50Hz
- Wall rods & tubes for wall mounting available in
the accessories section
Suitable for installation only on glass up to 8mm thick
IN STOCK – Typically dispatches within 3 business days
| Manufacturers Part Number | HV-150AE |
|---|---|
| Colour | White |
| Capacity (m3/hr) | 0210 m3/hr |
| Capacity (l/s) | 58.33 l/s |
| Current | 0.13A |
| Noise Level | 39 dB(A) |
| IP Rating | IPX4 |
| Wall Hole Size Tolerance | 183mm – 188mm Round |
| Window Hole Size Tolerance | 183mm – 188mm Round |
| Material | Plastic |
| Installation | This fan requires hardwiring by an electrician |
| Manufacturer | Fantech |
| Warranty | The manufacturer offers a 1 year replacement warranty (conditions apply) |
| General Exhaust Fan Advice | It is recommended to achieve a minimum of 15 air changes per hour in a bathroom to remove excess moisture., To work this out, calculate the volume of air in the room ( length x width x height, all in meters) and multiply this by the number of air changes to get the required air volume of the fan. |
Dimensions
| A | B | C | D |
| 214mm | 63mm | 35mm | 183mm – 188mm |
Accessories
AIR QUALITY