Ventair Madrid 3 in 1 Main Features
Extraction Rate | 330 m3/hr (91.6 l/s) |
---|---|
Motor Power | 50 watts |
Light: | 1x 20w 4000k LED centre panel light |
Heat: | Fan forced (Low 1400W/High 2000W) |
Hole (Cutout) Size: | 590mm x 320mm |
Fascia Size: | 630mm x 350mm |
Ductable: | Yes (125mm diameter) |
Recommended Room Size (Based On Achieving 15 Air Changes Per Hour) | 22 |
Capacity Disclaimer: | All capacity figures and technical data quoted is provided by the manufacturer, Capacity figures are based on the unit freeflowing (not connected to ducting). If you are ducting this unit it is advisable to keep the duct run as short, straight and tight as possible |
Room Size Recommended Disclaimer | As stated our “Recommended room size” figures are based on achieving 15 air changes per hour. Generally we have found this to be suitable, however it does not constitute specific advice. |
Includes a 4 switch wall control panel designed to provide convenient control of the light, extraction fan, and two switches for the heater. The first switch enables the heater to function at a low level of 1400w, and upon activating the second switch, the heater will switch to ‘boost’ mode, offering a high level of 2000w. It is important to note that the heater will only function when the first switch is turned on.