295m3/hr
Elicent E-Style 150HT Ceiling/Wall Exhaust Fan with Humidity Sensor & Timer – White
Original price was: $259.00.$219.00Current price is: $219.00.
The E-Style 150HT Exhaust Fan is an Italian made wall or ceiling mount exhaust fan. The E-style models have a built in back draft shutter and a running light on the face cover. This E-Style model has a built-in run on timer which allows the fan to continue running for a set time after the switch is turned off. It also has a built in Humidity Sensor (see image) – adjustable from 40%-90% relative humidity.
It can be connected to duct so the air may be exhausted out of the house. It also has a built-in back draft shutter (a clear plastic flap at the back) to stop warm air escaping or external air coming in through the fan.
IMPORTANT NOTE – As this fan has an inbuilt timer it requires a permanent active as well as a switched active. Please consult with your installing electrician prior to purchase. For detailed info please see the wiring diagram here.
—–
CUSTOMER NOTICE – This product is currently out of stock & not available for purchase. If you need some advice on alternatives please contact us.
—–
The E-Style Elicent Exhaust Fan is an Italian made wall or ceiling exhaust fan. The E-style models have a built in back draft shutter and a running light on the face cover.
- Built in run-on timer – allows the fan to continue running for a set time after the switch is turned off
- Run-on timer is adjustable from 3-25 minutes
- Easy to install
- European slim line design
- Supplied with back-draft shutters to prevent air from moving back into the room
- Quiet operation – innovative impellers permit limited noise level
- Maintenance free – self lubricating sleeve bearing motor for long life & noiseless operation
| Manufacturers Part Number | 2MU7502 |
|---|---|
| Colour | White |
| Capacity (m3/hr) | 0295 m3/hr |
| Capacity (l/s) | 82 l/s |
| Noise Level | 43.9 dB(A) |
| IP Rating | IPX4 |
| Ceiling Hole Size | ø 150mm |
| Wall Hole Size | ø 150mm |
| Duct Size | 150mm |
| Material | Plastic |
| Installation | This fan requires hardwiring by an electrician |
| Manufacturer | Elicent |
| Warranty | The manufacturer offers a 2 year replacement warranty (conditions apply) |
| General Exhaust Fan Advice | It is recommended to achieve a minimum of 15 air changes per hour in a bathroom to remove excess moisture., To work this out, calculate the volume of air in the room ( length x width x height, all in meters) and multiply this by the number of air changes to get the required air volume of the fan. |
Dimensions
| A | B | C | D | E |
| 200mm | 200mm | 119mm | 22mm | 149mm |
Pressure Curve
No Pressure Curve Published
3 reviews for Elicent E-Style 150HT Ceiling/Wall Exhaust Fan with Humidity Sensor & Timer – White
Only logged in customers who have purchased this product may leave a review.
Accessories
AIR QUALITY
Brian –
Fan works fine, a wee bit noisy for our application. But OK
Service was good.
Stuart Brunton –
Works fantasic as specified
Tony Eva –
Clears the condensation from the bathrooms very quickly.