The Fanco Studio is a low profile ceiling fan with three lightweight ABS plastic blades and an integrated dimmable CCT LED light. The fan comes SMART enabled and can be controlled via your smartphone with the Tuya app. A remote control is also supplied. With a drop of only 210mm from ceiling to blade this fan is a perfect choice for lower than average ceilings.
Pick your favourite colour temperature (3 options) & brightness level (8 options). When you turn your fan off, these settings will be remembered by the lights in built memory next time you turn it on.
Adjust these settings via the remote.
Use the supplied remote control to conveniently adjust the colour temperature or brightness level.
Or use the SMART APP on your device.
The ultimate in convenience PLUS unlock scheduling & automation! visit theFanco SMART ceiling fan guide to learn more
Can I turn the light on from a wall switch?
All fans with a remote control should be installed with an isolation switch, which can and often will be an on/off switch somewhere in the room. This switch is used to supply power to the fan and light and is required for safety reasons. As the light has a memory setting, if you turn it off at the isolation switch when the light is on when you turn it on again the light will come back on to the last setting, like a regular light switch. However, while the isolation switch is off, you won’t be able to turn on the fan.
User Replaceable LED Panel.
Thanks to its low wattage isolated diver the LED panel on this fan can also be easy replaced - no electrician needed!
Simply unscrew the old panel and unplug it, at which point you can replace it with the new one. Although they are designed to last a very long time, you can even buy a spare for the ultimate peace of mind! Scroll to the bottom of the page to add a replacement panel to your cart with the fan.
Remote is supplied with a wall cradle.
The supplied remote comes with a stylish full length wall cradle that attaches to the wall and sits discreetly behind the remote. Perfect if you are concerned about it getting misplaced!